×
You will be redirected back to your article in seconds

How DP Ben Davis and Panavision’s Dan Sasaki Picked the Right Lenses for ‘Captain Marvel’

Cinematographers coordinate their efforts with a platoon of visual artists and other artisans, from colorists to computer scientists, from digital imaging technicians to glassmakers. On “Captain Marvel,” Ben Davis worked closely with Dan Sasaki (pictured above), VP of optics at Panavision, to find exactly the right optical solutions for the look he imagined.

Their collaboration illustrates how artistic aspirations drive technical innovation, as well as the importance that lensing has taken on in the world of digital sensors, where film emulsion’s effects on the image through variations in exposure and development have given way to subtleties in optics and coatings.

Sasaki, a second-generation Panavision employee, literally grew up on film sets. “I love it when a cinematographer comes to me with a particular vision in mind,” he says. “We experiment with the various factors that contribute to the properties of a particular lens until we find the right look.”

In the case of “Captain Marvel,” Davis and Sasaki started with a set of Panavision Sphero 65 lenses. For scenes taking place in an older time period, Davis tried finding post-production techniques that delivered a more vintage look, but he found that the imagery merely looked softened, whereas he wanted something more akin to old Cooke Panchro or Canon K-35 lenses, designed and built decades ago. Neither of those lens types would cover the bigger image area of Davis’ large-format camera, and they lacked the mechanics and control conveniences of today’s lenses.

After a few iterations involving coatings and placement of elements, Davis liked what he saw. But here’s where the science of optics encounters the psychology of perception. “It’s very easy to detect the nuances between two lenses if I have a side-by-side comparison,” says Sasaki. “But when you’re watching a movie, very rarely do you see a split screen, or a resolution chart. If you’re paying attention to the story, you are not going to notice small differences. Ben wanted a difference that was more profound. We ended up with a set of spherical lenses that behave like anamorphic lenses. We also added other features such as susceptibility to light that created big rainbow flares and lifted contrast.”

Some actual K-35 elements were used in one of the first lenses, with the same effect eventually produced using proprietary Panavision glass. Adjustments continued after the initial tests. “If it weren’t for Ben’s shepherding, the project wouldn’t have come out as cool as it did,” says Sasaki. “Ultimately, it resulted in the introduction of the Panavision 65 Vintage series, which yield better speed and closer focus, along with those vintage properties.

“Just softening the image across the board isn’t going to cut it these days. With the resolution of the cameras and the screens that audiences see, along with the amount of content, cinematographers are asking for even greater variation. That trend goes against the relatively similar look of various digital sensors. It’s like the difference between a red wine and a white wine, compared to the difference between wine and whiskey.”

More Artisans

  • Smithsonian Handmaids Tale Costume

    Why the Smithsonian Chose to Enshrine 'Handmaid's Tale' Servant Costume

    The iconic red-caped, white-bonneted outfits worn by Elisabeth Moss and the other childbearing servants in Hulu’s “The Handmaid’s Tale,” created by costume designer Ane Crabtree, have become that show’s signature visual.  Hulu immediately knew it had a good thing, hiring groups of women around the country to parade in the garments to promote the show. [...]

  • Sir Lionel Frost (left) voiced by

    Why 'Missing Link's' Title Character Was One of Laika's Biggest Challenges

    Stop-motion studio Laika pushes design boundaries in every film it makes, and the lead character in “Missing Link” is no exception. “It became pretty apparent that [the character] Link was going to be the cornerstone,” says director and writer Chris Butler. “I did this rough drawing many years ago, and it was basically like a [...]

  • Missing Link Laika Studios

    New 3D-Printing Technology Was 'Missing Link' for Laika's Latest Stop-Motion Project

    For the upcoming animated comedy adventure “Missing Link,” stop-motion studio Laika set the bar very high. To execute the designs created by director and writer Chris Butler, artists would have to speed up their 3D printing of character faces — and those faces would have to be the most complex they’d ever created. “Missing Link” [...]

  • The Old Man and the Gun

    Ohio’s Midwest Locations and Flexible Tax Credit Lure Producers

    With its small towns, rolling farmlands and industrial cities, Ohio embodies the American Midwest. Other location lures for filmmakers include the shore along Lake Erie, the campus of Ohio State University, the striking skyline of Cincinnati and the Rock & Roll Hall of Fame in Cleveland. The Buckeye State also provides producers with a 30% [...]

  • Nancy Schreiber Mapplethorpe Cinematographer

    DP Nancy Schreiber Captures Life of Artist Robert Mapplethorpe in Grimy Gotham

    Don’t tell cinematographer Nancy Schreiber that she’s having a renaissance. That would imply there’ve been slumps in her long career, and she won’t have any of that, even if for a time she was taking smaller jobs as the gaps widened between larger gigs. “It’s never been about the money, for me,” says Schreiber over [...]

  • What Ariana Grande, Lady Gaga Share:

    LeRoy Bennett Keeps Top Acts Like Lady Gaga, Ariana Grande in the Spotlight

    You might say that LeRoy Bennett is a shining light among lighting and production designers for pop music. Doing double duty creating both touring sets and their illumination, he started out with a 14-year run as Prince’s collaborator, went on to work with Nine Inch Nails and Madonna and has counted Beyoncé’s and Bruno Mars’ [...]

More From Our Brands

Access exclusive content